| METROPOL CABIN TECHNICAL SPECIFICATIONS |
| PRODUCTION DIMENSIONS | Can Be Specially Produced On Demand. |
| HEIGHT | 2800 mm Parapet Included. |
| METAL MATERIALS | ST 37 |
| BETOPAN | TSE 634-2 |
| GLASS WOOL | TS 901 |
| POLYSTREN FOAM | TS EN 13163 |
| TECHNICAL DATA |
| EARTHQUAKE CONDITIONS | 1st degree |
| CLIMATE CONDITIONS | 3. Climate Zone |
| SNOW LOAD | 80 Kg/m² |
| WIND SPEED | 80 Km/Hour (provided that it is fixed to the ground) |
| EXTERNAL WALL TRANSMISSION COEFFICIENT | K: 0.50 Kcal/m2hc |
| ROOF TRANSMISSION COEFFICIENT | K: 0.69 Kcal/m2hc |
| BASE HEAT CONDUCTION COEFFICIENT | K: 0.68 Kcal/m2hc |
| CHASSIS LOAD CAPACITY | 200 Kg/m² |
| BASE |
| FLOOR COATING | PVC Mineflo with 2 mm thickness is used as floor covering on 14 mm non-flammable Betopan boards as the floor covering. |
| OUTER WALL |
| SYSTEM | It is made with carcass with the help of specially shaped profiles. |
| EXTERIOR COATING | The outer surface coating is optionally covered with 12 mm thick Taşonit or wood patterned concrete boards. |
| INTERNAL SURFACE COATING | The inner surface coating is 8 mm thick betopan (inner surface coating PVC paneling is used in metropolitan cabins with WC). |
| WALL INSULATION | 40 mm thick, 10 kg/m³ polystyrene foam (EPS) with fire class E; It is made with heat-insulated complete, healthy and safe materials. |
| INNER WALL |
| SYSTEM | It is made with carcass with the help of specially shaped profiles. |
| INTERNAL SURFACE COATING | The inner surface coating is 8 mm thick betopan (inner surface coating PVC paneling is used in metropolitan cabins with WC). |
| WALL INSULATION | 40 mm thick, 10 kg/m³ polystyrene foam (EPS) with fire class E; It is made with heat-insulated complete, healthy and safe materials. |
| ROOF |
| ROOF SYSTEM | It is produced with the help of specially shaped construction and carrier one-piece profiles, and it is made with 20 cm eaves and 36 cm high parapet. Rain water is discharged through corner columns. |
| ROOF INSULATION | The 80 mm thick mattress is made of glass wool (14 kg/m³). |
| INTERNAL SURFACE COATING | Inner surface ceiling covering PVC paneling is used (optional 8 mm concrete board can be used (inner surface ceiling covering PVC paneling is used in metropolitan cabins with WC). |
| EXTERIOR COATING | 0.50 mm thick 27 mm *200 mm deep Natural Trapezoidal Galvanized Sheet |
| DOORS |
| EXTERIOR DOOR | It is TSE certified white PVC joinery measuring 90*210 cm. |
| INTERIOR DOOR | It is an American wooden door measuring 80*200 cm. |
| WINDOWS |
| WINDOW | It is TSE certified white PVC joinery in 120 * 100 cm dimensions. |
| SILL | PVC moldings are used on the inner edges of the windows. |
| PINE | 4+9+4 double glazing is used. |
| DYES |
| EXTERIOR | Exterior surfaces are painted in the desired color with silicone-based exterior paint. |
| DOOR CASES | 1 coat Rapid primer painted. |
| METAL PARTS | 1 coat of Rapid primer paint is applied. |
| ELECTRICAL INSTALLATION (Flush mounted) |
| SYSTEM | Each room has a switch, a socket, and a telephone socket. In addition, spot luminaires are used for lighting at the four corners of the eaves. |
| CABLE | Electrical power is 2000 W 220 Volts, 3x2.5 mm for sockets, 2x1.5 mm for lighting, TSE certified NYM cables are used. |
| LIGHTING FIXTURES | TSE certified torus luminaire is used for lighting. |
| SOCKETS AND SWITCHES | TSE certified materials are used. |
| SANITARY INSTALLATION |
| SANITARY WARE | TSE certified materials are used. |
| CLEAN WATER INSTALLATION | TSE certified PPRC materials are used. |
| WASTE WATER INSTALLATION | TSE certified PVC material is used. |
| EXTERNAL LINKS |
| It is the customer's responsibility to pour concrete 20 cm more than the cabin dimensions, install the cabin on the ground, and make electricity, clean water and waste water connections. |
| LIFTING FUNCTION |
| Containers can be lifted and lowered from four corners with lifting eyebolts and steel ropes. |
EN 
